$45.99* PARKER PIN STRIPING / GRAPHIC TAPE 2012 & OLDER ** PRICE IS FOR 20 FEET OF TAPE

PARKER PIN STRIPING / GRAPHIC TAPE

* PRICE IS FOR 20 FEET OF TAPE

Only sold in 20-foot lengths

Parker Pin Strip - Black, White, and Gold

Matches 2012 and older boats

Don't forget the pin stripe arrows

Port side part # 122310

Starboard side # 122450

Surface Preparation:

Thoroughly clean the application area using soap and water to remove dirt and debris.
Wipe the surface with isopropyl alcohol to eliminate any remaining wax, grease, or residue.
Ensure the surface is completely dry before installation.

Installation Steps:

Measure and lightly mark your alignment points using masking tape to ensure straight placement.
Peel back a small portion of the backing and begin applying the stripe gradually, working from one end to the other.
Use a plastic squeegee or applicator tool to press the stripe down as you go, smoothing out air bubbles.
Apply firm, even pressure across the entire stripe once installed.

Helpful Tips:

Install in a controlled environment between 60°F and 80°F for best adhesion.
Avoid stretching the pinstripe during application.
If needed, a light mist of water with a few drops of dish soap can allow minor repositioning before final adhesion (only if the product allows wet installation).
Allow 24 hours before washing or exposing the area to heavy moisture.

If you have any questions during installation, please feel free to reach out. We’re happy to help.

hasImage yes

Write a Review

Write a Review